The 5-inch DTH (Down-The-Hole) hammer is a powerful drilling tool widely used across industries for efficiently creating boreholes in tough geological contexts.
By delivering high-frequency impacts to a drill bit, these hammers fracture rock or soil while effectively removing debris through the hole. They find essential applications in mining for blast holes, construction for foundation and utility drilling, geothermal projects, water well drilling, oil exploration, quarrying, foundation engineering, and environmental sampling.
The hammers’ adaptability and efficiency make them indispensable tools for precise and effective drilling in a range of challenging scenarios.
| Replacement Parts | Item Description | Weight Kg |
|---|---|
| 1. Top Sub (Back Head) | 15.0 |
| 2. “O” Ring of Top Sub | 0.01 |
| 3. Check Valve (Stop Valve) | 1.00 |
| 4. Spring | 0.04 |
| 5. Ring | 0.10 |
| 6. Compression Buffer (Rubber) | 0.06 |
| 7. Compression Buffer Seat (Rubber Seat) | 0.40 |
| 8. Control Tube (Air Distributor) | 4.00 |
| 9. Internal Cylinder (Internal Sleeve) | 4.70 |
| 10. Piston | 15.50 |
| 11. External Cylinder (Outer Sleeve) | 30.00 |
| 12. “O” Ring of Stop Ring | 0.01 |
| 13. Half Moons and Bit Retaing Ring (Stop Ring) | 0.30 |
| 14. Chuck Nut (Drive Chuck) | 6.40 |
| 15. Drill Bit | --- |
| TECHNICAL DATA | |
|---|---|
| Length (Without Bit) | 1214mm |
| Weight (Without Bit) | 77.5Kg |
| External Diameter | Ø125mm |
| Bit Shank | Cop54 | DHD350 |
| Hole Range | Ø135-Ø155 |
| Connection Thread | API 2 3/8” Reg | API 3 1/2” Reg |
| Working Pressure | 1.0-2.5Mpa |
| Recommeded Rotation Speed | 20-35r/min |
| ADVANTAGES |
|---|
| High performance in hard and soft formations |
| Spares and services locally available |
| Faster drilling speed and lower air consumption |
| Fewer internal parts |
| All parts heat treated |